China ISO CCC Approved Mini 25HP Farm Tractor with 4WD with high quality

Merchandise Description

ISO CCC Accredited Mini 25HP farm tractor with Four wheel drive
CHHGC-254 tractor
1.F8+R2 gearbox
two.PTO pace: 540/720 r/min
three.ISO:9001:2008
four.Tiny horsepower, substantial effectiveness
 

Benefit of CZPT 254

1.8+2 sliding gear adjust,all gears are organized in buy ,good adaptability in all agricultural situations .

two.Draft /placement management hydraulic regulating system :category I hitch:double pace PTO output.

three.Shut paddy front generate axle, substantial procedure performance and ideal for paddy procedure.

four.Alternatives:air brake .it can comprehensive all farm perform and transport function .

five.Reinforced PTO shaft ,hi-dependability .

6.Can put in famous engines like CZPT Brand ,effective and reputable.

 

Main products of mini tractor
3cylinder engine
Hydraulic steering
Solitary phase clutch
PTO:720rpm
Partial separated hydraulic hitch
Clipper-developed hood
Gearbox: F8+R2
Exterior air filter
Maintenance-free battery
six tooth spline

 

Optional Devices

Cabin

Roll bar

Solar-shade

Front ballast(8PCS)

Air brake

Multi-way valve

Heater

Mixture instrument

Make contact with Ms Blair
 
       

 
The picture of 25HP farm tractor
 

Farm tractors twenty five~130HP we can provide. 

our tractor have above 70 kinds tractor primary in 6 series.

one.thirty collection 250-354 (from 25HP-35HP 2/Four wheel drive)

2.forty series 400-554B (from 40HP-55HP 2/Four wheel drive)

three.50 collection 550-654 (from 55HP-65HP 2/4 wheel drive)

four.eighty sequence 700-854B (from 70HP -85HP 2/4wd)

5.ninety sequence 800-1004(from 80HP-100HP 2/4 wheel drive)

six.one hundred collection 1104-1304(from 110HP-130HP 4wd)

The record of tractors 

Specifications

Tractor Design CHHGC-254
Tractor Type 4X four
Dimension(MM) LXWXH 3200 X 1500 X 1880
Clearance (MM) 265
Structural   Mass(KG) 1330
Power Engine Kind XIHU (WEST LAKE) DIS.HU (WEST LAKE) DIS. KM385BT
Rated Electricity (KW) 18.four
Hood Streamlined
Equipment Box F8+R2(S liding  S leeve )
Steering Technique Variety Hydraulic   S teering
Tyre Kind Front Tyre 6.00-16
  Rear Tyre 9.50-24
Noise  D B(A) Environmental  N oise 85.4
  Ear  N oise ninety four
PTO Type  /

Velocity(r/min)

Rear  Non- I ndependent

720

PTO  Spline Size φ35 6 Teeth Rectangle Spline Shaft
Suspension Mechanism Type Rear 3-Point Suspension
Towing Products Fixed Drawbar
 Max. T owing  F orce (KN) six.7
Expectations GB/T15370-2004

Technical Parameters

Generation Workshop

Certificate

Organization Partners

FAQ

Q1. How to ship the Tractors?
A:    By container, bulk ship, RORO.

Q2. Do you have different horsepower tractors?
A:   Yes,we provide various product tractors and exported to many nations around the world.

Q3. What is your payment phrase?
A: We generally accept T/T or L/C is dependent on the amount. 
     T/T, deposit in advance, and balance compensated before shipping and delivery from factory.

This fall. Which design tractors do you offer?
A:  We provide all varieties of tractors this sort of as walking tractors, wheel tractors and many others,.

Q5. What is your conditions of shipping?
A:    FOB, CIF.

Q6. How about your shipping time?
A:   Generally, it will just take 35 days soon after getting your advance payment. The distinct delivery time is dependent on the items and the amount of your order.

Q7. Do you check all your items before shipping and delivery?
A:   Yes, we have a hundred% examination ahead of delivery

Q8: What can you assure to your enterprise associate?
A:   Best cost with good high quality. We promise good quality and right after sale provider to fulfill our organization companions.

US $4,388-5,694
/ sets
|
3 sets

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro III
Fuel: Gas / Diesel

###

Customization:

###

Tractor Model CHHGC-254
Tractor Type 4X 4
Dimension(MM) LXWXH 3200 X 1500 X 1880
Clearance (MM) 265
Structural   Mass(KG) 1330
Power Engine Type LAIDONG KM385BT
Rated Power (KW) 18.4
Hood Streamlined
Gear Box F8+R2(S liding  S leeve )
Steering System Type Hydraulic   S teering
Tyre Type Front Tyre 6.00-16
  Rear Tyre 9.50-24
Noise  D B(A) Environmental  N oise 85.4
  Ear  N oise 94
PTO Type  /

Speed(r/min)

Rear  Non- I ndependent

720

PTO  Spline Size φ35 6 Teeth Rectangle Spline Shaft
Suspension Mechanism Type Rear Three-Point Suspension
Towing Equipment Fixed Drawbar
 Max. T owing  F orce (KN) 6.7
Standards GB/T15370-2004
US $4,388-5,694
/ sets
|
3 sets

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro III
Fuel: Gas / Diesel

###

Customization:

###

Tractor Model CHHGC-254
Tractor Type 4X 4
Dimension(MM) LXWXH 3200 X 1500 X 1880
Clearance (MM) 265
Structural   Mass(KG) 1330
Power Engine Type LAIDONG KM385BT
Rated Power (KW) 18.4
Hood Streamlined
Gear Box F8+R2(S liding  S leeve )
Steering System Type Hydraulic   S teering
Tyre Type Front Tyre 6.00-16
  Rear Tyre 9.50-24
Noise  D B(A) Environmental  N oise 85.4
  Ear  N oise 94
PTO Type  /

Speed(r/min)

Rear  Non- I ndependent

720

PTO  Spline Size φ35 6 Teeth Rectangle Spline Shaft
Suspension Mechanism Type Rear Three-Point Suspension
Towing Equipment Fixed Drawbar
 Max. T owing  F orce (KN) 6.7
Standards GB/T15370-2004

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

Shaft CollarThe Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China ISO CCC Approved Mini 25HP Farm Tractor with 4WD     with high quality China ISO CCC Approved Mini 25HP Farm Tractor with 4WD     with high quality
editor by czh 2023-01-07

pto shafts

As one of leading shaft pto manufacturers, suppliers and exporters of products, We offer shaft pto and many other products.

Please contact us for details.

Mail:shafts-pto.net

Manufacturer supplier exporter of shaft pto

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

Recent Posts