China Good quality High Quality CNC Machine Hydraulic Shaft Transmission Shaft Drive Shaft Conveyor Roller Shaft drive shaft yoke

Product Description

Company  Profile

Established in 2009, HangZhou CZPT Trading Co., Ltd is a professional supplier for conveyor parts, located in ZHangZhoug province. We focus on supplying a variety of conveyor parts, including conveyor tubes, conveyor frames, conveyor rollers, bearing housings and so forth.

With our professional technology R&D team, and experienced quality control department, our products have been awarded the ISO9001 Quality Management System Standard and our main markets are in America, Europe, Asia and Australia.

Factory advantage

Professional and experienced technology team
All products inspected before shipping with reasonable prices
Low MOQ and free sample
We are audited by SGS and passed the ISO9001:2008 certification

Industries service

Industrial machine
Electronic and communication
Oil, gas,mining and petroleum
Construction industry
Equipment CNC Machining Center, CNC Lathes, CNC Milling Machines, Punching and drilling machines,  Stamping machines
Precision Processing CNC machining, CNC turning and milling, laser cutting, drilling, grinding, bending, stamping, welding

 

 

Roller size

 No. Standard Diameter Length Range
(mm)
Bearing Type
Min-Max
Shell Thickness of Roller
   mm Inch      
1 63.5 2 1/2 150-3500 203 204 3.0mm-4.0mm
2 76 3 150-3500 204 3.0mm-4.5mm
3 89 3 1/3 150-3500 204 205 3.0mm-4.5mm
4 102 4 150-3500 3.2mm-4.5mm
5 108 4 1/4 150-3500 306 3.5mm-4.5mm
6 114 4 1/2 150-3500 306 3.5mm-4.5mm
7 127 5 150-3500 306 3.5mm-5.0mm
8 133 5 1/4 150-3500 305 306 3.5mm-5.0mm
9 140 5 1/2 150-3500 306 307 3.5mm-5.0mm
10 152 6 150-3500 4.0mm-5.0mm
11 159 6 1/4 150-3500 4.0mm-5.0mm
12 165 6 1/2 150-3500 307 308 4.5mm-6.0mm
13 177.8 7 150-3500 309 4.5mm-6.0mm
14 190.7 7 1/2 150-3500 309 310 4.5mm-7.0mm
15 194 7 5/8 150-3500 309 310 4.5mm-8.0mm
16 219 8 5/8 150-3500 4.5mm-8.0mm

Advantage:
1.The life time: More than 50000 hours
2. TIR (Total Indicator Runout)
0.5mm (0.0197″) for Roll Length 0-600mm
0.8mm (0.571″) for Roll Length 601-1350mm
1.0mm (0. 0571 “) for Roll Length over 1350mm
3.Shaft Float≤0.8mm
4..Samples for testing are available.
5. Lower resistance
6. Small maintain work
7. High load capability
8. Dust proof & water proof

 

CONVRYOR ROLLER SHAFTS

We can produce roller shafts and We do customeized 
Product Size:φ10mm – 70mm
Max Length: 3000mm
Surface Tolerance: g6
Surface Roughness:0.8mm

 

Specification ASTM A108   AS1443
Steel Grade  Q235B,C1571,C1045(we can also do other steel grade per your requirments)
Size Φ18mm-φ62mm
Diameter Tolerance  ISO286-2,H7/H8
Straightness 2000:1

O.D  63.5-219.1mm
W .T  0.45-20mm 
Length  6–12m
Standard  SANS 657/3,ASTM 513,AS 1163,BS6323,EN10305
Material  Q235B, S355,S230,C350,E235 etc. 
Technique  Welded,Seamless
Surface oiled ,galvanized or painted with all kinds of colors according to client’s request.
 Ends  1.Plain ends,
 2.Threading at both side with plastice caps 
 3.Threading at both side with socket/coupling.
 4.Beveled ends, and so on
 Packing  1.Water-proof plastic cloth,
 2.Woven bags, 
 3.PVC package, 
 4.Steel strips in bundles 
 5.As your requirment
Usage   1.For low pressure liquid delivery such as water,gas and oil.
 2.For construction
 3.Mechanical equipment
 4.For Furniture 
Payment&Trade Terms  1.Payment : T/T,L/C, D/P, Western union 
 2.Trade Terms:FOB/CFR/CIF
 3.Minimum quantity of order : 10 MT (10,000KGS)
 Delivery Time  1.Usually,within10-20days after receiving your down payment.
 2.According to the order quantity 

 

Conveyor Roller Tube

Conveyor Roller Tube

Specification SANS657/3,ASTM513,AS1163,BS6323,EN10305 or equivalent international standard.
Steel grade S355/S230,C350,E235,Q235B
Sizes 63.5mm-219.1mm ect
Ovality tolerance of body ≤0.4mm(60.3mm-152.4mm)
≤0.5mm(159MM-168.3mm)
≤0.6mm(178mm-219mm)
Straightness 2000:1

 

 

 

if you are interesting in our products or want any further information, please feel free to contact us!

I am looking CZPT to your reply.

Best regards
Ruth
HangZhou CZPT TRADING CO., LTD 
1801 CZPT Building, No.268 Xierhuan Road, HangZhou City, ZHangZhoug Province, China

Surface Tolerance: G6
Surface Roughness: 0.8
Max Length: 3000mm
Standard: ASTM A108
Size: Od18mm—62mm
Steel Grade: C1018 C1020
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China Good quality High Quality CNC Machine Hydraulic Shaft Transmission Shaft Drive Shaft Conveyor Roller Shaft   drive shaft yoke		China Good quality High Quality CNC Machine Hydraulic Shaft Transmission Shaft Drive Shaft Conveyor Roller Shaft   drive shaft yoke
editor by CX 2023-08-22

pto shafts

As one of leading shaft pto manufacturers, suppliers and exporters of products, We offer shaft pto and many other products.

Please contact us for details.

Mail:shafts-pto.net

Manufacturer supplier exporter of shaft pto

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

Recent Posts