China factory 30 M3, 32 M3, 34 M3, 35 M3, 36 M3 Bulk Cement Tank Truck Trailer pto shaft angles

Product Description

30 M3, 32 M3, 34 M3, 35 M3, 36 M3 Bulk Cement Tank Truck Trailer
 

Our main products include full series products of CNHTC(HOWO,STR,Golden Prince,etc.),buses, trailers, including dump truck, tractor truck, concrete mixer truck, sprinkler truck,water/Oil tank truck, truck mounted crane, concrete pump truck.etc, low bed semi-trailer,flatbed semi-trailer, bulk cement semi-trailer, skeleton semi-trailer and spare parts for them.
 

LUCKIN VEHICLE supply 40CBM 3 Axles Cement Bulk Tank Semi Trailer, which is specially designed for transportation of large quantities of dried dust materials, such as fly ash, cement, lime powder, ore powder, etc., whose particle diameter is not greater than 0.1mm. Powder Cement Bulk Tanker Trailers use pneumatic unloading. When the vertical height of the unloading reaches 15m, the horizontal conveying distance can reach 5m.

LUCKIN VEHICLE Cement Bulk Carrier Tanker Semi Trailer uses its own engine power to drive the vehicle-mounted air compressor through a power take-off (PTO). The compressed air is sent to the air chamber at the lower part of the sealed tank through the pipelines, then cement on the fluidized bed is suspended into a fluid state. When the pressure in the tank reaches the rated value, the fluidized cement flows through the pipelines for transportation after opening the unloading butterfly valve.

  

Product Parameters

 

Tare weight 10000kg
Size 10700mm*2500mm*4000mm
Volume 45M3
Tank body Q235A/5mm steel sheet                                        
End plate Q235A/6mm .ball shape
Axle 3 axle  CZPT brand  13T
Suspension Mechanical suspension American type local brand
Leaf spring Leaf spring 10pcs*90*13mm
Manhole cover 500mm manhole cover .2 sets
Tire 12R22.5 double star brand 12pcs
Wheel rim 9.0-22.5 better brand     12pcs
Discharge valve 4″disc valve
Discharge pipe 4″seamless steel tube
Outlet pipe 4″rubber hose.6m
Kingpin JOST brand 2″ bolt-in king pin
Landing gear JOST brand two-speed, manual operating ,heavy duty landing gear 24T
Engine Diesel engine: CZPT brand model: 4102.
Air compressor 37 KW, 0.2Mpa. 1000r/Min
Compartment Single                                   
Braking system WABCO RE6 relay valve ;T30/30 spring brake chamber;40L air tanks
ABS Optional
Light LED 8 side lights and 2 rear lights 2 width lamp
Air-charging system 2″main hole.2″check valve .1.5″safe valve.0.4Mpa.gauge
Quadratic blow 1″ diameter check valve
Painting Complete chassis sand blasting to clean rust ,1coat of anticorrosive prime,2coats of final paint
Accessories One standard tool box,one spare tire carrier,one crank,one shaft head wrench,four side light,two rear light
Date of delivery 20 workdays after we received 30% of contract value T/T down payment.

 

 

40CBM 3 Axles Cement Bulk Tank Semi Trailer

Our Advantages

Price advantage:
We sell in factories without middlemen, so our price will be better than that of trading companies.

Quality advantage:
From the moment the customer places an order, we will be equipped with a professional team. Professional personnel are responsible for the design, production, tracking and transportation. We adopt the principle of responsibility system, and the quality can be guaranteed.

Professional advantages:
We have our own R & D team and design team. Our team has received professional training and good education, and is skilled in using CAD, SW and other drawing tools

Service advantages:
The staff will give the most favorable and accurate quotation to the customer within 2 hours according to the customer’s requirements, make the most appropriate purchase scheme for the customer, and formulate the perfect solution according to the customer’s after-sales demand within 10 hours.

RELATED PRODUCTS:

 

FAQ

1.What is the delivery date?
It usually takes 15 to 25 days of receiving the deposit.

2.Payment and mode of transportation?
We accept both T/T and L/C .
Bulk, rolling, loading, land transportation, I will actively provide customers with cheaper transportation.

3. If Our Vehicle/Trailer Can Couple With Your Tractor Head ?
– 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman, Beiben, Volve…
– If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing.

4.Can you satisfy my special requirement?
Definitely!We can make the trailers or trucks based on your requirement.

 

After-sales Service: 2 Years
Warranty: 1 Year
Tanker Body Material: 5mm High Strength Wear-Resistance Steel
Volume: 30cbm to 50cbm
Axles: 3 Axles
Tire: 12 Units
Customization:
Available

|

Customized Request

Shaft Collar

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China factory 30 M3, 32 M3, 34 M3, 35 M3, 36 M3 Bulk Cement Tank Truck Trailer   pto shaft anglesChina factory 30 M3, 32 M3, 34 M3, 35 M3, 36 M3 Bulk Cement Tank Truck Trailer   pto shaft angles
editor by CX 2023-04-22

pto shafts

As one of leading shaft pto manufacturers, suppliers and exporters of products, We offer shaft pto and many other products.

Please contact us for details.

Mail:shafts-pto.net

Manufacturer supplier exporter of shaft pto

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

Recent Posts