China 40 HP 4WD China New Mini Farm Tractor with Cabin Cheap Price pto shaft danger

Product Description

  1. Power variety: 20HP, 25HP, 30HP,35HP, 40HP, 45HP
  2. Engine: Nationwide II or III Emission CZPT or Quanchai 3 and 4 cylinder diesel engine
  3. Drive Strategy: 2WD and Four wheel drive optional
  4. Transmission Method: shaft transmission
  5. Clutch: one or double phase clutch optional
  6. Gearbox: 8+2
  7. Steering approach: mechanical or hydraulic steering optional
  8. PTO velocity: 540/760r/min double pace
  9. Sunshine lose and cabin are optional
  10. Implements: Can match with all varieties of farm implements
  11. Lower price tag and reputable
  12. More details and much more choices refer to subsequent technological info or contact us immediately.

 

Y Series 25HP and 55HP Tractor Data
Model WM250Y WM254Y WM300Y WM304Y WM350Y WM354Y WM400Y WM404Y WM450Y WM454Y WM500Y WM504Y WM550Y WM554Y
Tractor Power  25HP 25HP 30HP 30HP 35HP 35HP 40HP 40HP 45HP 45HP 50HP 50HP 55HP 55HP
Type four*2 four*four 4*2 four*four 4*2 four*four four*two 4*4 4*two four*4 4*2 four*four four*two four*4
Dimension mm 
 Length mm 2630 2700 2700 2800 2780 2850 2800 2900 2800 2900 2800 2900 2850 2950
Width mm 1260 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560
Height mm 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896
Tread Front Wheel 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Rear Wheel a thousand 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Wheel Foundation mm 1560 1600 1660 1660 1660 1660 1690 1690 1690 1690 1690 1690 1690 1690
Min.Ground Clearance three hundred 300 320 300 320 three hundred 320 300 320 three hundred 320 three hundred 320 three hundred
Dry Mass kg 1100 1150 1150 1200 1200 1250 1200 1300 1200 1300 1200 1300 1200 1300
Engine
Model JD2100 LD385 LD390 LD390 LD4L22 LD4L22 LD4L23 LD4L23 LD490 LD490 LD4100 LD4100 LD4100 LD4100
Type Vertical Water Cooledand 4-stroke
Rated Energy kw 18.4 18.four 22.one 22.one twenty five.eight twenty five.eight 29.4 29.4 33.one 33.1 36.eight 36.eight 40.four 40.four
Rated Rev. r/min 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400
Fuel  Diesel  Oil
Tire
FrontWheel five.50-16(2WD)/6.00-sixteen/6.fifty-sixteen(4wd)
Rear Wheel 9.50-24/eleven.2-24
Clutch  Dry-friction,one phase or Dry-friction,Two Stage
Steering Mechanical Variety/Mechanical Kind or Hydraulic Type
Transmission Box (4+1)×2or(4+1)×2×2(with  creeping Shift)
Suspension Variety Rear 3-point suspension Course I
PTO Shaft
Type and Rev  r/min  Non-impartial type720 or Non-independenttype540/720
SplineSize  I35 Rectangle Spline With 6 teeth (6×28.91×34.79×8.69)

US $4,500-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor
Certification: ISO, CE, CCC
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

Y Series 25HP and 55HP Tractor Data
Model WM250Y WM254Y WM300Y WM304Y WM350Y WM354Y WM400Y WM404Y WM450Y WM454Y WM500Y WM504Y WM550Y WM554Y
Tractor Power  25HP 25HP 30HP 30HP 35HP 35HP 40HP 40HP 45HP 45HP 50HP 50HP 55HP 55HP
Type 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4
Dimension mm 
 Length mm 2630 2700 2700 2800 2780 2850 2800 2900 2800 2900 2800 2900 2850 2950
Width mm 1260 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560
Height mm 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896
Tread Front Wheel 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Rear Wheel 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Wheel Base mm 1560 1600 1660 1660 1660 1660 1690 1690 1690 1690 1690 1690 1690 1690
Min.Ground Clearance 300 300 320 300 320 300 320 300 320 300 320 300 320 300
Dry Mass kg 1100 1150 1150 1200 1200 1250 1200 1300 1200 1300 1200 1300 1200 1300
Engine
Model JD2100 LD385 LD390 LD390 LD4L22 LD4L22 LD4L23 LD4L23 LD490 LD490 LD4100 LD4100 LD4100 LD4100
Type Vertical Water Cooledand 4-stroke
Rated Power kw 18.4 18.4 22.1 22.1 25.8 25.8 29.4 29.4 33.1 33.1 36.8 36.8 40.4 40.4
Rated Rev. r/min 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400
Fuel  Diesel  Oil
Tire
FrontWheel 5.50-16(2WD)/6.00-16/6.50-16(4WD)
Rear Wheel 9.50-24/11.2-24
Clutch  Dry-friction,single stage or Dry-friction,Two Stage
Steering Mechanical Type/Mechanical Type or Hydraulic Type
Transmission Box (4+1)×2or(4+1)×2×2(with  creeping Shift)
Suspension Type Rear three-point suspension Class I
PTO Shaft
Type and Rev  r/min  Non-independent type720 or Non-independenttype540/720
SplineSize  I35 Rectangle Spline With 6 teeth (6×28.91×34.79×8.69)
US $4,500-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor
Certification: ISO, CE, CCC
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

Y Series 25HP and 55HP Tractor Data
Model WM250Y WM254Y WM300Y WM304Y WM350Y WM354Y WM400Y WM404Y WM450Y WM454Y WM500Y WM504Y WM550Y WM554Y
Tractor Power  25HP 25HP 30HP 30HP 35HP 35HP 40HP 40HP 45HP 45HP 50HP 50HP 55HP 55HP
Type 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4 4*2 4*4
Dimension mm 
 Length mm 2630 2700 2700 2800 2780 2850 2800 2900 2800 2900 2800 2900 2850 2950
Width mm 1260 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560 1560
Height mm 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896 1896
Tread Front Wheel 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Rear Wheel 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
Wheel Base mm 1560 1600 1660 1660 1660 1660 1690 1690 1690 1690 1690 1690 1690 1690
Min.Ground Clearance 300 300 320 300 320 300 320 300 320 300 320 300 320 300
Dry Mass kg 1100 1150 1150 1200 1200 1250 1200 1300 1200 1300 1200 1300 1200 1300
Engine
Model JD2100 LD385 LD390 LD390 LD4L22 LD4L22 LD4L23 LD4L23 LD490 LD490 LD4100 LD4100 LD4100 LD4100
Type Vertical Water Cooledand 4-stroke
Rated Power kw 18.4 18.4 22.1 22.1 25.8 25.8 29.4 29.4 33.1 33.1 36.8 36.8 40.4 40.4
Rated Rev. r/min 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400
Fuel  Diesel  Oil
Tire
FrontWheel 5.50-16(2WD)/6.00-16/6.50-16(4WD)
Rear Wheel 9.50-24/11.2-24
Clutch  Dry-friction,single stage or Dry-friction,Two Stage
Steering Mechanical Type/Mechanical Type or Hydraulic Type
Transmission Box (4+1)×2or(4+1)×2×2(with  creeping Shift)
Suspension Type Rear three-point suspension Class I
PTO Shaft
Type and Rev  r/min  Non-independent type720 or Non-independenttype540/720
SplineSize  I35 Rectangle Spline With 6 teeth (6×28.91×34.79×8.69)

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China 40 HP 4WD China New Mini Farm Tractor with Cabin Cheap Price     pto shaft dangerChina 40 HP 4WD China New Mini Farm Tractor with Cabin Cheap Price     pto shaft danger
editor by czh 2023-01-08

pto shafts

As one of leading shaft pto manufacturers, suppliers and exporters of products, We offer shaft pto and many other products.

Please contact us for details.

Mail:shafts-pto.net

Manufacturer supplier exporter of shaft pto

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

Recent Posts