China 3000gallons 4X2 LHD Rhd Vacuum Sewage Suction Truck pto shaft adapter tractor supply

Solution Description

I. Description of 3000gallons sewer vacuum tanker truck 10000L 10m3 sewage suction cleaner trucks for sale

Function:

(1) Vacuum sewage suction truck (also known as truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum squander selection truck ,sewage suction truck,sewage vacuum truck ,waste vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and many others.) is utilised to gather, transport and discharge liquid these kinds of as dirty drinking water,sludge,septic,crude oil and strong stuff this kind of as small stones,bricks as effectively.It is appropriate for cleaning the sewer,cesspit,gully ,and so on. It is commonly used in surroundings and sanitation subject.

(2)Accessory of sewage suction function :Equipped with PTO, transmission shaft, vacuum suction sewage pump, higher strain molding tank, humidity separator, gasoline-oil separation, numerous directional management valve, hanger rod, self-discharging valve, suck fecal gun and pipe community program.

(3) Vacuum tank capacity ranges from 3,000 Liters to 20,000 liters 

Functions:

a.Cylinder vacuum tank can be lifted hydraulically to 40-forty five degree.Rear doorway can be opened and closed hydraulically.

 

b.Undertake EU vacuum pump (Italy brand) or equivalent China best brand name double vacuum pumps,tremendous powerful,extremely productive.

 

c.Pump can be operated by a hydraulic motor or by an auxiliary engine.

 

d.Overfill program with songs CZPT is equipped ,avoiding the vacuum pump hurt from sewage drinking water into vacuum pump when the tank is entire.

 

e.Nice shape ,rational construction,durable and prolonged services existence.

II. Technical 

Car Description  
Overall dimensions  6000*2100*2600mm
GVW  7300kg
Mass in working order 4000kg
Chassis model XIHU (WEST LAKE) DIS.FENG
Traction type 4*2
     
Tanker Description
Tanker Potential 4cbm
Materials 5mm thickness, substantial good quality carbon metal
Structure Welding, vacuum tank, Cylindrical
Pump Variety Vacuum pump
Flux forty five(L/S)
Rating speed five hundred~800(r/min)
Shaft power four(kw)
Characteristics Reduced pace, low gasoline usage, minimal sounds, substantial vacuum, large efficiency
Manufacture HangZhou WEILONG Pump Co., Ltd.
Pipe Suction and discharge pipe
Special operate Suction time ≤ 5min,
Successful suction range ≥ 8, 
Max vacuum degree ≤ 15 Kpa, 
dump angle ≥ 45
Standard configuration Geared up with Examine window,discharge valve,cleaning  apparatus,5 meter long suction pipe,oil-h2o separators,  overflow valve,and many others.
Cylinder vacuum tank can be lifted hydraulically to 
forty-forty five diploma. Rear door can be opened and closed hydraulically.
Optional configuration Tanker material: stainless metal or carbon metal
Vacuum pump : Italy or Spain vacuum pumps.
Anti-rust coating within tank

 

 

III. VACUUM SEAGE SUCTION TRUCK Details Picture FOR REFERENCE 
 

V. VACUUM SEWAGE SUCTION TRUCK WORKMANSHOP

VI. A lot more Decision OF VACUUM SEWAGE SUCTION TRUCK FOR YOUR REFERENCE.

VII. Transport:RORO/BULK VESSEL/CONTAINER 

  
RORO: The truck is pushed to the ship within directly and set effectively. It can shield the truck becoming rusty and broken in the course of delivery.

BULK:  The truck is lifted by crane then place on the vessel deck. This product is considerably less costly.

CONTAINER: The truck is put into the container. This product is utilized for modest product vans

VIII. ABOUT US  

ZheJiang MANTEN Car CO.,LTD  is an approved unique truck manufacturer which has a lot of several years in style ,merchandise ,sales and
provider in particular vans like as boom truck , fireplace truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and and so forth

(1) A lot more than five hundred staff, big and superior production 
(2) 25 specialist engineers, can provide the ideal and least expensive design and style
(3) Construct strict QC group to guarantee the good quality
(4) 1 year or 30,000km warranty which will come first.
(5) One set of spare parts of chassis offered which will aid you save cash on maintenance. 
(6) Provide complex support and soon after serive for daily life.
(7) Expert product sales group which will support you to pick suited truck.

 

US $19,500-26,500
/ UNIT
|
1 UNIT

(Min. Order)

###

After-sales Service: 24 Hours Online
Warranty: 12months
Certification: ISO9000, CCC
Emission Standard: Euro III/IV/V/VI
Payload: 5-7ton
Transmission Type: Manual

###

Customization:

###

Vehicle Description  
Overall dimensions  6000*2100*2600mm
GVW  7300kg
Mass in working order 4000kg
Chassis brand DONGFENG
Traction type 4*2
     
Tanker Description
Tanker Capacity 4cbm
Material 5mm thickness, high quality carbon steel
Structure Welding, vacuum tank, Cylindrical
Pump Type Vacuum pump
Flux 45(L/S)
Rating speed 500~800(r/min)
Shaft power 4(kw)
Features Low speed, low fuel consumption, low noise, high vacuum, high efficiency
Manufacture Hangzhou WEILONG Pump Co., Ltd.
Pipe Suction and discharge pipe
Special function Suction time  5min,
Effective suction range  8, 
Max vacuum degree  15 Kpa, 
dump angle  45
Standard configuration Equipped with Inspect window,discharge valve,cleaning  apparatus,5 meter long suction pipe,oil-water separators,  overflow valve,etc.
Cylinder vacuum tank can be lifted hydraulically to 
40-45 degree. Rear door can be opened and closed hydraulically.
Optional configuration Tanker material: stainless steel or carbon steel
Vacuum pump : Italy or Spain vacuum pumps.
Anti-rust coating inside tank
US $19,500-26,500
/ UNIT
|
1 UNIT

(Min. Order)

###

After-sales Service: 24 Hours Online
Warranty: 12months
Certification: ISO9000, CCC
Emission Standard: Euro III/IV/V/VI
Payload: 5-7ton
Transmission Type: Manual

###

Customization:

###

Vehicle Description  
Overall dimensions  6000*2100*2600mm
GVW  7300kg
Mass in working order 4000kg
Chassis brand DONGFENG
Traction type 4*2
     
Tanker Description
Tanker Capacity 4cbm
Material 5mm thickness, high quality carbon steel
Structure Welding, vacuum tank, Cylindrical
Pump Type Vacuum pump
Flux 45(L/S)
Rating speed 500~800(r/min)
Shaft power 4(kw)
Features Low speed, low fuel consumption, low noise, high vacuum, high efficiency
Manufacture Hangzhou WEILONG Pump Co., Ltd.
Pipe Suction and discharge pipe
Special function Suction time  5min,
Effective suction range  8, 
Max vacuum degree  15 Kpa, 
dump angle  45
Standard configuration Equipped with Inspect window,discharge valve,cleaning  apparatus,5 meter long suction pipe,oil-water separators,  overflow valve,etc.
Cylinder vacuum tank can be lifted hydraulically to 
40-45 degree. Rear door can be opened and closed hydraulically.
Optional configuration Tanker material: stainless steel or carbon steel
Vacuum pump : Italy or Spain vacuum pumps.
Anti-rust coating inside tank

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China 3000gallons 4X2 LHD Rhd Vacuum Sewage Suction Truck     pto shaft adapter tractor supplyChina 3000gallons 4X2 LHD Rhd Vacuum Sewage Suction Truck     pto shaft adapter tractor supply
editor by czh 2023-01-03

pto shafts

As one of leading shaft pto manufacturers, suppliers and exporters of products, We offer shaft pto and many other products.

Please contact us for details.

Mail:shafts-pto.net

Manufacturer supplier exporter of shaft pto

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

Recent Posts